The
CH Series Horizontal vessel is intended for low pressure transport
and storage of liquid nitrogen, oxygen and argon. The horizontal
configuration allows for large volumes of liquid to be portable
and accessible at conveniently lower heights. This vessel was
originally designed for interaction with LN2
liquefiers because of the low profile. Mounted on casters, a standard
feature, movement within lab or plant operations is made simple
and easy.
A
unique support system is used in order to insure strength and
durability without sacrificing thermal efficiency. The lowest
possible heat leak is the driving force for the design of this
product. Loss rates on this model have historically been lower
than industrial products normally available. All vessels are fabricated
with a stainless steel inner and outer jacket up to 1000 liters.
At this threshold, a carbon steel painted jacket is also available
up to 2000 liters.
The
standard configuration is supplied with casters for mobility,
2" bottom clearance for a lower profile, a 1.5" o.d.
neck opening, located center top with a flanged termination. Two
handles welded to the side heads as well as lifting lugs round
out the offerings. Maximum allowable working pressure for this
vessel is 25 psig. It is not a DOT or ASME certified fabrication.
Sizes range from 300 liters to 2000 liters. The configuration
of this vessel can vary significantly when options are added.
AVAILABLE
OPTIONS
Top
Mounted Plumbing, Removable
The manifold is totally removable leaving access to the neck opening
and inner vessel possible. The disconnect mechanism is a flanged
assembly which is detachable without the use of tools. Included
on the manifold are the liquid fill/withdrawal valve, vent valve,
pressure gauge and two relief devices.
Differential
Pressure Liquid Level Gauge
The
CH Series Horizontal Container is intended for: low pressure transport
and storage of liquid nitrogen, oxygen and argon. The maximum
allowable working pressure is 22 psi. Higher pressure vessels
have been supplied upon request.
Self
Pressurizing System
A
built in vaporizer supplies on demand pressure for large volume
transfers or pressure maintainability for instrumentation. Standard
units come with a regulator factory set at 20 psig and a shut
off valve for a vessel at rest.
Front
Mounted Plumbing
For
applications where top mounted plumbing cause height issues. The
plumbing location gives the unit an even lower profile with a
height reduction of 7".
Extra
Access Port, Top Mounted
Located
on the top of the unit with a flanged termination, this accessibility
is added convenience. It can serve as an additional fill or withdrawal
port along with supplying accessibility to the inner vessel without
disturbance of the working manifold.
Skid
Mounting
A
substitution for casters, supplies a way to mount vessels inside
of trucks or concrete slabs.
Bottom
Drain, Trapped with Valve
A
gravity withdrawal option, another way to access liquid.