800.426.2186 Request Form

How to Select a Liquid Nitrogen Dewar

Frequently Asked Questions

A: The CL/CLPB Series has liquid nitrogen dewar sizes from 15L to 500L. CH Series horizontal tanks are available in sizes from 300 L to 2000 L. CF Series open-mouth dewar flasks are available in virtually any size. The CFN Series is a basic vacuum flask design with sizes from 25L to 200 L. All of these standard dewars can be built to a custom size.

A: If so, you’ll need a tank with sturdy construction and safety features. If you require a vertical tank, a CL/CLPB dewar is perfect. All models above the 15-liter size have casters for mobility. A differential pressure-type liquid level gauge, full tricock vent valve, and relief devices will safely maintain the optimal pressure within the tank.
For a horizontal tank, see the CH Series. These dewars are fitted with features that make it easy to move, like casters and welded handles. The low profile design and robust support system make these tanks safe and convenient. The CH Series is not designed for over the road transporting, inter-facility use only.

A: The ideal truck-mounted tank would fit into an enclosed vehicle with space left over for other needed equipment. A heavy-duty, thermal-efficient tank, like a tank from Cryofab’s CLD/CHD Series, would be perfect for over-the-road deliveries and cryogenic transportation over long distances without the worries of lost product or structural failure.

A: For low-pressure transport and storage, between 10 PSI and 25 PSI, consider our standard portable liquid nitrogen dewars. The CLPB series adds a self-pressurizing system that eliminates the need for external pressurization. If your application requires a Maximum Allowable Working Pressure (M.A.W.P.) greater than 25 PSI, please consult the factory: engineering@cryofab.com

A: For liquid only, consider a standard CL/CLPB Series dewar. If gas service is required, consult the factory: engineering@cryofab.com

A: We can produce white-label liquid nitrogen tanks with custom ports to fit with your product design. We will design a dewar to your specifications. With that prototype, we can manufacture tanks in small or large production runs.

For straight, conventional liquid dispensing, a portable CL/CLPB dewar is an excellent choice. For very basic liquid nitrogen containers, the CF dewar flasks and CFN atmospheric tanks are simple and dependable. Customizations to consider: adding a side neck for access means that the center neck can be used for an experiment, viewports allow for observation inside the dewar.

A: For small, intermittent transfers, liquid cylinder filling, and mini-bulk trans-filling, we recommend uninsulated stainless steel transfer lines such as our CFUL hose. Applications that require reduced product evaporation and elimination of frost and condensation during transfers will need a transfer line with vacuum jacketing and super insulation, such as our custom CFCL line.

A: Consider how you will fill and withdraw liquid from the container. Would additional fill ports or built-in transfer lines and valves be useful? 
Safety systems, such as relief valves and pressure gauges are important to most cryogenic systems. Lifting lugs, side handles, and castors make moving the tank easier and safer. See the list below for more possibilities.

A: We realize that every company has different performance needs. If you need it, we can make it. That’s absolutely true, and we’ll create a dewar that meets your very specific requirements. It starts with a conversation with our cryogenic engineering experts.

A: The CL/CLPB is an ideal liquid nitrogen tank that works equally well with liquid oxygen or liquid argon. The CH, CLD/CHD, and CFN can be purposed for liquid oxygen and argon as well. CF Series dewars are ideal for liquid nitrogen, liquid oxygen, liquid argon, and liquid natural gas.

We have a wide range of standard containers for cryogenic heliumhydrogen tanks, and superconducting magnet dewars.

Optional Add-Ons For Your Liquid Nitrogen Dewar

Once an application is established we then might ask or offer any of the following optional additives.

  • CFUL-4 (4′ cryogenic fill/withdrawal transfer hose, armor casing)

  • CFUL-6

  • 1″ o.d. phase separator w/hose adapter

  • Locking casters

  • Outboard caster configuration

  • Vertical 1/2″ withdrawal port

  • Gravity feed top port (Allows access to inner reservoir through top)

  • Dedicated solenoid Outlet, 1/4″ NPT

  • Removable manifold

  • Additional segregated fill/withdrawal valve

  • Side neck access so center neck can be utilized for an experiment

©Cryofab 2024... Proudly designed by TCS&Co, and built by SWC.